RAMM Water Pumps 3/4″ Barbed Slip Valve
$4.99
Ramm Water Pumps 3/4″ barbed slip valve for 1/2 inch threads. No tools required for water flow control on water pumps that do not have a valve built in. This compact valve slips on to any 1/2 inch mnpt threaded output to give versatility when choosing the desired flow of pump. This water flow controller is specially designed to not put stress on pump even when turned all the way down. 3/4″ ID tubing fits on the barb fitting, for easy install. By your water fountain experts RAMM water pumps. Note: for pond pumps only with a maximum lift of 15 ft for less. Not for pressures over 8 psi.
| Weight | .1 lbs |
|---|
Related products
-
5/16″ by 1/2″ adapter for small to medium water fountain pumps
$3.49Add to cart5/16″ by 1/2″ adapter for small to medium water fountain pumps. This adapter is a commonly used fitting among small to medium water fountain pumps. One end measures 5/16th(1/4″) of an inch, the other end measures 1/2 inch. Perfect for submersible applications especially with flex tubing. By your Ramm Pump Specialists.. Copyright [10.25.21] by Wholesalepumps.com
-
3/4″ barbed x 1/2″ threaded Female adapter for small to medium water fountain pumps
$4.99Add to cart3/4″ barbed x 1/2″ threaded Female adapter for small to medium water fountain pumps. Adapter is a commonly used fitting among small to medium water fountain pumps with 1/2″ male thread. One end measures 1/2″ inch FMPT, the other measures 3/4 inch barb. Perfect for submersible applications especially with flex tubing. By your Ramm Pump …
3/4″ barbed x 1/2″ threaded Female adapter for small to medium water fountain pumpsRead More
-
Ridgid 1/2″mnpt x1/4″Barb Elbow adapter for Ridgid tile saw pump replacement RELL05X025
$6.99Add to cartRidgid 1/2″mnpt x1/4″Barb Elbow adapter for Ridgid tile saw pump replacement RELL05X025 . Matches RIDGID Replacement Submersible Water Pump for RIDGID Tile Saws ; Pump Part Number, AC11306. By your Ramm Pump Specialists.. Copyright [10.25.21] by Wholesalepumps.com
