Category: Parts Washer Pumps
Parts Washer Pumps for water based solvents and petroleum based solvents.
Wet rotor and Lip seals styles with conduit fitting and bare leads.
Showing all 9 results
-
PP-399N Jebao Parts Washer Pump
$54.99Add to cartProduct Descrioption, Jebao PP-399N Submersible “Parts Washer” Pump ships with 1/2 inch barbed fitting, 250 gph , 115v, for 20 gallon parts washer. **For use with water based solvents** Furthermore this pump has electrical connections to easily hard-wire into parts washers. No need for splicing or cutting chords. 120 Volt 0.23 Amp 60 Hertz 3.5-4 Gallon …
-
AP2000 20-40 gall. parts Washer Pump 115v, 300gph
$54.99Read moreAP2000 Replacement Submersible parts washer Pump, 120v AC, 60Hz, 43Watts, Head max 2.2m ( Shutoff 7.2 Ft ) Qmax 1200 L/h (317 gph), 1\2″ Female pipe thread, snap off front cover for easy cleaning. Vinton shaft mount (for water based solvents only) Stainless Steel Shaft. Dimensions: L4″ x H3.25″ x W3.1″ , 1\2″ FNPT Out. Electrical …
-
PP-399N Jebao Parts Washer Replace with RWPP399N-ZG
$68.99Read morePP-399N Jebao Parts Washer Replace with RWPP399N-ZG Submersible “Parts Washer” Pump , Universal Design, slightly larger dimensions and slightly higher flow performance. Ships with 1/2 inch barbed fitting, 250 gph @ 2ft , 115v, for 19 or 39 gallon parts washer. **For use with water based solvents** Furthermore this pump has electrical connections to easily hard-wire …
PP-399N Jebao Parts Washer Replace with RWPP399N-ZGRead More
-
Beckett GP210V Parts Washer 200 gph
$75.99Add to cartBecket GP210V Parts washer pump is built tough to withstand harsh solvent chemicals , ships with Viton Seal to handle parts washer fluid. The discharge is 1/4″ Male Pipe Thread for 1/2″ ID tubing. Fluid specs are as follows 190 gph @ 2 ft , 137 gph @ 4 ft and 70 gph @ 6 …
-
Beckett GP325C-230v Parts Washer Pump 340 gph 230v
$94.99Add to cartBeckett GP325C-230v Parts Washer Pump 340 gph 230v has a useable lift of up to 10 feet. 6ft cord with bare leads. 1/4″ MNPT discharge , accepts 1/2″ ID hose. Viton seal. 1\2″ conduit. Screened suction easy to remove and rinse. Great for industrial applications using water based parts washer fluid. Copyright [10.25.15] by Wholesalepumps.com. …
-
Beckett GP325VH Parts Washer 340 gph
$96.99Add to cartBecket GP325V Parts washer pump is built to withstand harsh solvents. Ships with a Viton Seal to handle parts washer fluid , Viton can handle various chemicals. The discharge is 1/4″ MPT for plumbing if needed and also accepts 1/2″ ID tubing for flexibility. Fluid specs are as follows 340 gph @ 1 ft , …
-
Little Giant PE-2YSA parts washer Replace with RW-2YSAV-6
$99.99Add to cartLittle Giant PE-2YSA 518550 parts washer Replace with RW-2YSAV-6 Viton Seal parts washer 115v pump. For submersible use in parts washers using aqueous solutions or UL listed solvents. Conduit Fitting 1/2″ threaded, 6 ft cord for hard wiring into existing system. For Fluid application , re-circulation . Pump replacements by RAMM Water Pumps. Copyright [10.25.15] by …
Little Giant PE-2YSA parts washer Replace with RW-2YSAV-6Read More
-
1-YS 205 gph
$124.99Read moreLittle Giant 1-YS. 115 volt , 1/150 hp , 200 gph parts washer pump. Fitted with 1/2″ conduit fitting for easy electrical setup and ships with a 6 ft cord set. Permanently lubricated and aluminum housed squirrel cage motor is protected by Fluoroelastomer shaft seal. For added protection against metal debris pump is fitted with …
-
2E-NYS 115v 300 gph
$152.99Read moreLittle Giant 2E-NYS 502020 115 volt, 1/40 hp is the largest of the parts washer pumps. Coming in at max flow of 300 gph and a max lift of 11.8 ft making it the most powerful in it’s field. Ships with a 6 ft power cord with bare leads and 1/2″ conduit fitting. Permanently lubricated, …
