PondMaster HY-Drive WFP1600 hyd1600 2583 replace with RF1600-20
$161.99
Out of stock
PondMaster HY-Drive WFP1600 2583 replace with RF1600-20 ~ 1750 gph pump with efficient asynchronous direct drive motor, no seals to break and easy to clean washable pre filter ensures long trouble free pump life. Low energy use, water lubricated rotor. Specifically designed for use with ponds and waterfalls. Fish safe, fresh or salt water design can run continuous. Inline or submersible. Includes extra-large clog-resistant filter screen. 20 ft power cord. Ships with adapters for 1-1/4″ and 1″ tubing . Note: when using pump inline unit must be placed below water level to prime. Bringing you quality RAMM pump replacement products. Copyright [10.25.15] by Wholesalepumps.com.
DIMENSIONS
A) IN/OUT 1″ FNPT X 1″ MNPT
HEIGHT 6″ LENGTH 9″ WIDTH 4-3/4″
ELECTRICAL AMPS 1 VOLTS 115 WATTS 120
PERFORMANCE MAX FLOW : 1750 GPH
Recommended Lift 14 ft or less
SHUTOFF 17 FT
WARRANTY MANUFACTURE 2 YEAR
| Weight | 10 lbs |
|---|
Related products
-
MD9.5 Danner Model 9.5 B Submersible/Inline Pump 10ft Cord 950 gph
$105.99Add to cartE160713 8C99 MODEL 9.5 B Submersible/ Inline Pump 115 VOLTS A.C./ 60Hz./ 93 WATTS/ 1.33 AMPS PondMaster MD9.5 Continues the tradition of efficient mag-drive pumps falling in the medium to larger category. The MD9.5 is the same well built pump as the PM 9.5 but with a 10 ft cord. The same high flow rate is …
MD9.5 Danner Model 9.5 B Submersible/Inline Pump 10ft Cord 950 gphRead More
-
Beckett W1150 Replacement RW1150 1150 gph
$124.99Add to cartBeckett W1150 7302110 (No Longer Produced) Closest Replacement RAMM RW1150 Submersible Pond Pump. Slightly larger than original but with the same Water flow and 18ft lift. Please pay close attention to dimensions listed (make sure it will fit your existing pump area). Energy saving split tube motor. Vortex impeller. Overload protection by means of thermal overload …
-
PondMaster FOAM BLOCK 12730 Models 9.5 thru 18
$14.99Add to cartPondmaster Filter for E160713 PM9.5 thru 18 and MD9.5 thru 18 Filter DIMENSIONS HEIGHT 4.5″ LENGTH 5.5″ WIDTH 3″ Foam pre-filter block for the following pumps MD and PM Model 9.5, Model 12, Model 18. PM Model 9.5b, Model 12b, Model 18b E160713 LISTED 8C99.
