LifeGard Sea Horse .75 hp 4560 gph

LifeGard Sea Horse .75 hp is identical to the .50 hp but slightly higher lift and flow and is a self priming pump for inline use. Great for waterfalls. Self-priming design. When pump is stopped the waterfall water runs backwards and drains pipe but this problem is solved by installing a swing check valve on suction pipe. If by chance water did drain because of check valve failure the pump holds water in the priming pot to restart avoiding dry-run. Reinforced fiberglass for strength and durability with a large capacity debris trapping basket with see through lid. Easy access drain plugs for cold weather draining , prevents freezing. All Sea Horse Pumps are threaded 1.5″ FNPT Suction by 1.5″ FNPT discharge. This unit can also be used in smaller swimming pools. Note: must have at least 12 foot of head or lift to operate properly , this can be achieved by installing a special valve, sold here . By your Waterfall pump sales experts. Copyright [10.25.15] by Wholesalepumps.com

Pump Model No: DYNII-NI-3/4
Part No: 340115
Motor #: S48AA47A03
HP: 3/4
115v FR:48Y
60Hz 1⌀
3450 RPM S.F. 1.00

Dimensions : L 24-7/8″ x W 7-3/4″ x H 12-1/8″
Volts: 115 Vac | Amps : 9.2
Performance:
a) 4620 gph @ 15 ft
b) 4200 gph @ 20 ft
c) 3120 gph @ 30 ft
d) 1800 gph @ 40 ft
Ponds: 20 ft x 20 ft x 1.5 ft deep
Waterfalls : 20 high x 5 ft wide x 1/2″ thick
Shutoff 50 ft
Warranty : Manufacture 1 Year