RILGP3 Replacement impeller
$9.99
Impeller Replacement RILGP3 for RAMM Submersible and inline dual purpose pumps, 240 gph to 350gph , Matches the following RAMM pumps.:RP340-20, RWFP-320 gph, RWPF-320, RWPS1.5b, RWPS3b.
.
| Weight | .5 lbs |
|---|---|
| Dimensions | 6 × 4 × 4 in |
Related products
-
JR-800 replacement impeller
$9.99Add to cartJR-800 impeller for RAMM Submersible pumps, 200 gph, Matches the following RAMM pumps.PJR-800, JR800, RPT-750, RWMZ20750-6. Call to verify fit with other Ramm Products. RAMM Water Pump engineers. Copyright [10.25.23] by Wholesalepumps.com. Dimension’s: Shaft including rubber holders :2-1/8″ Dimension’s: Impeller Dia. 1-1/8″, Impeller Width 1/4″
-
Cal Pump P600-20 Replacement RWP600-20LF 580 gph
$89.99Add to cartCal Pump P600-20 Replacement RWP600-20LF 580 gph , 20 ft cord, 115v, same dimensions and performance. It can be used for ponds as large as 600 gallons. Filter NOT included, (you must re-use your old filter or for inline use). Non-corrosive plastic housing Only one moving part for long life and better performance. Note: when …
-
Pony Pump IRK-360_ICG-360-2_SRK-360-2_KIT_IMP
$26.99Read morePony Pump Impeller kit # SRK-360-2 fits the proven pony pump models 360 115 volt and the 365 12 volt models. IRK-360_ICG-360-2_555706_SRK-360-2 Red Lion ALL THE SAME KIT also fits 3mpu-B-110 pump. Impeller Dimensions Diameter: 1-3/8″ Impellers : 6 width: 1/2″ shaft: 5/16″ with one side flat to hold impeller. RAMM Pumps. Copyright [10.25.15] by …
-
Cal Pump P80 indoor-2-prong cord RWP80-I 105 gph
$18.99Read moreCal Pump P80 indoor-2-prong cord RWP80-I Submersible Fountain Pump. Built in flo-control at the base of the pump for lower suction ability and thin indoor cord set. Excellent pump for tabletop fountains up to 1.5 feet high. Discharge adapters are setup for 1/2″ or 1/4 ” ID hose. Ramm pump experts. Copyright [10.25.15] by Wholesalepumps.com. DIMENSIONS: CORD …
