RIJ2000 Replacement impeller
$16.99
Impeller Replacement RIJ2000 for RAMM Submersible and inline dual purpose pumps, 400 to 530 gph , Matches the following RAMM pumps: RPS450-12
| Weight | .5 lbs |
|---|---|
| Dimensions | 6 × 4 × 4 in |
Related products
-
Cal Pump CFS170T 1″ FNPT Barrel Filter Replace with RWCSF1-BF
$14.99Add to cartCal Pump CFS170T 517100 1″ FNPT Barrel Filter Replace with RWCSF1-BF. Filter Screen for pump models with 1″ MNPT(male pipe thread). Note: Filter is a solid design and does not split. By RAMM Water pumps. Copyright [10.25.23] by Wholesalepumps.com DIMENSIONS: DIA. 3-1/4″, IN 1″ FNPT(female pipe thread), L 4″
-
Pony Pump IRK-360_ICG-360-2_SRK-360-2_KIT_IMP
$26.99Read morePony Pump Impeller kit # SRK-360-2 fits the proven pony pump models 360 115 volt and the 365 12 volt models. IRK-360_ICG-360-2_555706_SRK-360-2 Red Lion ALL THE SAME KIT also fits 3mpu-B-110 pump. Impeller Dimensions Diameter: 1-3/8″ Impellers : 6 width: 1/2″ shaft: 5/16″ with one side flat to hold impeller. RAMM Pumps. Copyright [10.25.15] by …
-
Cal Pump P600-20 Replacement RWP600-20 580 gph
$91.99Add to cartProduct Description, RWP600-20 Submersible Pump Same as P600, 580 gph , 20 ft cord, 115v, same dimensions and performance. It can be used for ponds as large as 600 gallons. Filter included . Features & Benefits: Non-corrosive plastic housing Only one moving part for long life and better performance. Note: when using pump inline unit must …
-
Cal Pump P80 indoor-2-prong cord RWP80-I 105 gph
$18.99Read moreCal Pump P80 indoor-2-prong cord RWP80-I Submersible Fountain Pump. Built in flo-control at the base of the pump for lower suction ability and thin indoor cord set. Excellent pump for tabletop fountains up to 1.5 feet high. Discharge adapters are setup for 1/2″ or 1/4 ” ID hose. Ramm pump experts. Copyright [10.25.15] by Wholesalepumps.com. DIMENSIONS: CORD …
