MD24 Model 24 Submersible pump 10ft Cord 2400 gph
$189.99
Supreme MD24 E160713 8C99 PondMaster magnetically driven pump. The largest of the MD line of pumps. Suitable for all garden project because of it’s dual purpose “inline or submersible”. Uses the same ceramic magnet on a ceramic shaft as it’s counter part PM24 but with a 10 ft power cord means a savings for you . The only moving part and easily replaceable “impeller and shaft”, also available is the “volute” as a replacement part and are normally stocked items. Easy to remove washable filter keeps out debris. Pump is designed with 10 ft grounded power cord with 3 prong plug and utilizes the latest in magnetically driven technology. Note: when using pump inline unit must be placed below water level to prime. PondMaster pump mag experts Copyright [10.25.15] by Wholesalepumps.com.
Quantity Discount Available!
DIMENSIONS
CORD 10 FT IN OUT 1″ FNPT X 1″MNPT LxHxW 7.25″x5.75″x3.625″ SCREEN 3″DIA. x 4″L
ELECTRICAL AMPS 2.2 VOLTS 120 VAC WATTS 237
PERFORMANCE
A) 2400 GPH @ 0 FT
B) 1964 GPH @ 5 FT
C) 1419 GPH @ 10 FT
D) 720 GPH @ 15 FT
SHUTOFF 18 FT
PONDS: 20 ft x 10 ft x 1.5 ft
WATERFALLS: 5 ft high x  6 ft wide .250 thick
WARRANTY MANUFACTURE LIMITED 3 YEAR
| Weight | 12 lbs |
|---|
Related products
-
PondMaster MD1.5 2521 140 gph Danner Model 1.5
$33.99Add to cartE160713 Listed 8C99 MODEL 1.5 Submersible Pump 115 VOLTS A.C./ 60Hz./ 12WATTS/ 0.1AMPS MD1.5 PondMaster amazing fountain and statuary pump. This little unit can lift water up to 5 ft and shuts off at 6 ft. and it does all this with only 10 watts of power. Recommended for statuary’s with a height of 5 …
-
PondMaster FOAM BLOCK 12730 Models 9.5 thru 18
$14.99Add to cartPondmaster Filter for E160713 Â PM9.5 thru 18 and MD9.5 thru 18 Filter DIMENSIONS HEIGHT 4.5″ LENGTH 5.5″ WIDTH 3″ Foam pre-filter block for the following pumps MD and PM Model 9.5, Model 12, Model 18. PM Model 9.5b, Model 12b, Model 18b E160713 LISTED 8C99.
-
Impeller 12776 For Model 18 MD18 or PM18 Utility Pond Pump
$46.99Add to cartReplacement Impeller Pondmaster Danner Mfg. 12776 fits Model 18 MD18 and PM18 Pumps PondMaster Replacement Impeller assembly for the following units MD18_2718, PM18_2728 supreme utility pumps. Powerful neodymium magnet. Assembly rides on high tech ceramic bearings.
-
Impeller 12756 Fits MD12 and PM12 Model 12
$37.99Add to cartPondMaster Danner MFG. Impeller assembly for the following units MD12 2712 and PM12 2722 E160713 LISTED 8C99.  High Tech Ceramic shaft construction. Matches Model 12 PM12 and MD12 pond utility pumps. RAMM Pumps. Copyright [10.25.15] by Wholesalepumps.com
