Husqvarna Masonry Tile Saw Pump 18G361 replacement RW18G361-6
$59.99
Husqvarna Masonry Tile Saw 18G361 Pump replacement RW18G361-6, 210 gph, 120v, 60Hz, Dry rotor (sealed) direct drive. No oil. 3 prong 6 ft cord with ground. 1/4″ MNPT Outlet , accepts 1/2″ id Tubing. Suction Screen. Lift of up to 6 feet, shutoff 7 ft. RAMM Water Pumps, Copyright [10.25.15] by Wholesalepumps.com.
Pump Dimensions: Cord 6 Ft.
H4-1/4″ x L3-1/4″ x W2-5/8″
Electrical: Volts 120
Performance
210 gph @ 0 ft
133 gph @ 4 ft
77 gph @ 6 ft
d) shut off 7 ft
Warranty Manufacture 1 Year
| Weight | 4 lbs |
|---|
Related products
-
Ridgid 1/2″mnpt x1/4″Barb Elbow adapter for Ridgid tile saw pump replacement RELL05X025
$6.99Add to cartRidgid 1/2″mnpt x1/4″Barb Elbow adapter for Ridgid tile saw pump replacement RELL05X025 . Matches RIDGID Replacement Submersible Water Pump for RIDGID Tile Saws ; Pump Part Number, AC11306. By your Ramm Pump Specialists.. Copyright [10.25.21] by Wholesalepumps.com
-
90 degree elbow for tile saw pump 1/2 in. slip by 1/4 in. barb TSP-EL
$5.99Add to cart90 degree elbow for tile saw pump 1/2 in. slip x 1/4 in. barb TSP-EL. 1/4 in. barbed fitting x 1/4 in. id tubing. 1/2 in. slip fitting for pumps with a 1/2 in. outlet. Low profile rigid design for difficult tasks. By Ramm Water Pumps. Copyright [10.25.23] by Wholesalepumps.com
-
MK Diamond Pump 155987 replacement RMK155987-6
$23.99Add to cartMK Diamond Pump 155987 replacement RMK155987-6 Submersible pump is used for MK Diamond 7″ Tile Saw Models: MK-270, MK-370, MK-370EXP, MK-470 flow controller built into nose of pump with bottom suction screen to keep out debris. Ramm Water Pumps. Copyright [10.25.15] by Wholesalepumps.com CORD: 6 FT, 3 PRONG, PUMP: H x L x W 2.5″ X 2″ X 2.38″, …
