Danner 260A submersible pump ~ 260gph
$49.99
PondMaster Danner 260A 02505 submersible fountain pump with 1/2″ ID hose outlet , flow control and 10 ft cord. E160713, Listed 8C99, Model 260A Utility pump, great for fountains with a required lift of 5.5ft or less. 25 watt, 120v, 60Hz. Available now through your PondMaster Danner Pump specialist. Copyright [10.25.15] by Wholesalepumps.com.
Dimensions : Out 1/2″ Id hose
L4-3/8″ x W3-1/4″ x H3-5/8″
Cord: 10 ft,Â
Performance: Max Flow 260 gphÂ
Shutoff : 7 ft.
Warr. 180 days
| Weight | 3 lbs |
|---|
Related products
-
PondMaster MD1.5 2521 140 gph Danner Model 1.5
$33.99Read moreE160713 Listed 8C99 MODEL 1.5 Submersible Pump 115 VOLTS A.C./ 60Hz./ 12WATTS/ 0.1AMPS MD1.5 PondMaster amazing fountain and statuary pump. This little unit can lift water up to 5 ft and shuts off at 6 ft. and it does all this with only 10 watts of power. Recommended for statuary’s with a height of 5 …
-
PM2 Danner Model 2 Utility Pump 18ft Cord 250 gph
$78.99Add to cartE160713 LISTED 8C99 MODEL 2 UTILITY PUMP 115 Volts A.C./ 60Hz/ 24 WATTS/ 0.4 AMPS Product Description: Danner Mfg. PondMaster Magnetic Drive Supreme Model 2 (PM2) 02522, 250 gph Submersible or Inline Pond Fountain Pump, 18Ft cord, 115v, 60 Hz, 24 Watts, 0.4A. Smallest of the PM line of pumps. Uses the same ceramic magnet …
-
PondMaster FOAM BLOCK 12730 Models 9.5 thru 18
$14.99Add to cartPondmaster Filter for E160713 Â PM9.5 thru 18 and MD9.5 thru 18 Filter DIMENSIONS HEIGHT 4.5″ LENGTH 5.5″ WIDTH 3″ Foam pre-filter block for the following pumps MD and PM Model 9.5, Model 12, Model 18. PM Model 9.5b, Model 12b, Model 18b E160713 LISTED 8C99.
-
Impeller 12756 Fits MD12 and PM12 Model 12
$37.99Add to cartPondMaster Danner MFG. Impeller assembly for the following units MD12 2712 and PM12 2722 E160713 LISTED 8C99.  High Tech Ceramic shaft construction. Matches Model 12 PM12 and MD12 pond utility pumps. RAMM Pumps. Copyright [10.25.15] by Wholesalepumps.com
