Cal Pump P600-20 Replacement RWP600-20 580 gph
$91.99
Product Description, RWP600-20 Submersible Pump Same as P600, 580 gph , 20 ft cord, 115v, same dimensions and performance. It can be used for ponds as large as 600 gallons. Filter included . Features & Benefits: Non-corrosive plastic housing Only one moving part for long life and better performance. Note: when using pump inline unit must be placed below water level to to expel air. Magnetically Driven high tech ceramic Magnet and shaft for longevity, attach filter to nose of pump when used as submersible and without filter when used inline. By RAMM Water pumps. Copyright [10.25.15] by Wholesalepumps.com
- Dimensions : L 5″ X W 3.75″ X H 4″, In/Out 1″ MNPT Threaded, Cord 20ft
- Electrical: AMPS .48, Volts 115,
- Performance:
- A) 590 GPH @ 0 FT
- B) 480 GPH @ 2 FT
- C) 400 GPH @ 4 FT
- D) 315 GPH @ 6 FT
- E) 205 GPH @ 8 FT
- SHUTOFF 10.7 FT
Warranty
Manufacture 180 Days
| Weight | 4 lbs |
|---|
Related products
-
Cal Pump P1500-20 RWP1500-20F 1500 gph
$149.99Add to cartProduct Description, Cal Pump P1500 Replace With RWP1500-20 Magnetic Drive Submersible Pump with powerful neodymium magnet 115v, 20 ft cord, 1500 gph. Motor Cooled & lubricated by water. UL Listed 3 prong power cord with ground. For small waterfalls, can be used for ponds as large as 1500 gallons. Filter included . Features & Benefits. Ceramic …
-
Cal Pump CFS170T 1″ FNPT Barrel Filter Replace with RWCSF1-BF
$14.99Add to cartCal Pump CFS170T 517100 1″ FNPT Barrel Filter Replace with RWCSF1-BF. Filter Screen for pump models with 1″ MNPT(male pipe thread). Note: Filter is a solid design and does not split. By RAMM Water pumps. Copyright [10.25.23] by Wholesalepumps.com DIMENSIONS: DIA. 3-1/4″, IN 1″ FNPT(female pipe thread), L 4″
-
Cal Pump P80 indoor-2-prong cord RWP80-I 105 gph
$18.99Read moreCal Pump P80 indoor-2-prong cord RWP80-I Submersible Fountain Pump. Built in flo-control at the base of the pump for lower suction ability and thin indoor cord set. Excellent pump for tabletop fountains up to 1.5 feet high. Discharge adapters are setup for 1/2″ or 1/4 ” ID hose. Ramm pump experts. Copyright [10.25.15] by Wholesalepumps.com. DIMENSIONS: CORD …
