Cal Pump P1500-20 replace with RWP1500-20LF less filter 1500 gph
$146.99
Cal Pump P1500-20 replace with RWP1500-20LF less filter 1500 gph Magnetic Drive Submersible Pump with powerful neodymium magnet 115v, 20 ft cord. Motor Cooled & lubricated by water. UL Listed 3 prong power cord with ground. Filter NOT included, (you must re-use your old filter or for inline use). For small waterfalls, can be used for ponds as large as 1500 gallons. Ceramic shaft for longevity Non-corrosive plastic housing Only one moving part for long life and better performance. Note: when using pump inline unit must be placed below water level to prime. In or out of water. Your pump replacement experts,  Copyright [10.25.20] by Wholesalepumps.com.
- Dimensions: L 6″ X W4.25″ X H 5″ In/Out : 1″ MNPT Threaded, Cord : 20ft
- Electrical: amps 1.5, Volts 120, watts 155
- Performance:
- a) 1500 gph @ 3 ftÂ
- b) 1300 gph @ 5 ft
- c) 940 gph @ 8 ft
- d) 565 gph @ 10 ft
- e) 140 gph @ 11 ft
- SHUTOFF 12 FT
- Warr, Manufacture 180 days
| Weight | 8 lbs |
|---|
Related products
-
Cal P100 Pump Replace with RCP100 ~ 100 gph
$20.99Add to cartCal P100 Pump Replace with RCP100 ~ 100 gph, Submersible Fountain Pump, with flo-control. This pump is excellent for tabletop fountains up to 2.5 feet high. Discharge adapters are setup for 1/2″ or 7/16″(1/4″) ID hose. The best replacements by your pump experts RAMM Water Pumps. Copyright [10.25.15] by Wholesalepumps.com. DIMENSIONS:  CORD 6 FT, HEIGHT …
-
Cal Pump P80 Replacement RWP80 80 gph
$18.99Add to cartCal Pump P80 Replacement RWP80 80 gph Submersible Fountain Pump. Built in flo-control at the base of the pump for lower suction ability. Suction cups at base keep the pump sturdy. This pump is excellent for tabletop fountains up to 1.5 feet high. Discharge adapters are setup for 1/2″ or 7/16 ” ID hose. Cal …
