RWP600 Impeller -W- Bearing Set
$24.99
Ramm RWP600 Impeller With Bearing Set Matches: Impeller pump model RWP600. Ships with two bearings.
| Weight | .5 lbs |
|---|---|
| Dimensions | 6 × 4 × 4 in |
Related products
-
Cal Pump P900-20 Replacement RWP900-20F 1000 gph
$106.99Add to cartProduct Description, Cal P900-20 Replacement RWP900-20F Submersible Pump, 1000 gph , 115v, 1″ Outlet, 20 ft Cord, Magnetic drive, New and improved powerful neodymium magnetic rotor. It can be used for ponds as large as 1000 gallons. Filter included . Non-corrosive plastic housing Only one moving part for long life and better performance. Low Power draw …
-
Cal P100 Pump Replace with RCP100 ~ 100 gph
$20.99Add to cartCal P100 Pump Replace with RCP100 ~ 100 gph, Submersible Fountain Pump, with flo-control. This pump is excellent for tabletop fountains up to 2.5 feet high. Discharge adapters are setup for 1/2″ or 7/16″(1/4″) ID hose. The best replacements by your pump experts RAMM Water Pumps. Copyright [10.25.15] by Wholesalepumps.com. DIMENSIONS:  CORD 6 FT, HEIGHT …
-
Cal Pump P1500-20 replace with RWP1500-20LF less filter 1500 gph
$146.99Add to cartCal Pump P1500-20 replace with RWP1500-20LF less filter 1500 gph Magnetic Drive Submersible Pump with powerful neodymium magnet 115v, 20 ft cord. Motor Cooled & lubricated by water. UL Listed 3 prong power cord with ground. Filter NOT included, (you must re-use your old filter or for inline use). For small waterfalls, can be used for …
Cal Pump P1500-20 replace with RWP1500-20LF less filter 1500 gphRead More
-
Cal Pump P140 Replace WIth RP140 200 gph
$27.99Add to cartProduct Description, Cal Pump P140 Replace with pump RP140 indoor,outdoor magnetically driven 200 gph Submersible Pump with SS shaft for longevity, only one moving part. This pump is perfect for fountains, statuary’s and small ponds, has a lift of 5 feet but recommended for 4’ft Vert. or less . It can be used for ponds …
