Cal Pump S580 Pump Replace with RWS580-13
$179.99
Cal Pump S580 Pump Replace with RWS580-13 600 gph , Submersible / In-line pump for pond and fountain only. 20ft power cord set . 3/4″ male thread inlet and 1/2″ male threaded outlet adapters, slip on brackets and filter included. Max 600 gph with a usable lift of up to 10 ft with a shutoff of 14 ft. Water lubricated motor ( no oil or seals). Note: when operated inline place at or below water level, not for use with hot water applications. By your pond pump engineers Ramm pumps. Copyright [10.25.22] by Wholesalepumps.com
Pump Construction: corrosion resistant polymersÂ
Dimensions:Â
Pump Cord 20 ft
Performance : 600 gph @ 0 ft
Recommended lift : 10 ft or less
Shutoff 14 ft
Warr. 180 days
| Weight | 8 lbs |
|---|
Related products
-
Cal Pump S900T-50 ft cord 800 Gph
$219.99Read moreS900T-50 517010 Cal Pump Exact model as the S900T-6 but with 50 ft cord set and continues to deliver after all these years. Full service 24/7 duty submersible pump  with the ability to produce out of pond inline. For fountains, ponds and small waterfalls. Solid construction of bronze and Stainless Steel make these pumps legends …
-
Cal Pump S580-50 Pump W/50 foot cord Replace with RWS580-50
$199.99Add to cartCal Pump S580-50 Pump W/50 foot cord Replace with RWS580-50 600 gph , Submersible / In-line pump for pond and fountain only. 50ft power cord set professionally spliced 15 ft from pump with bare open leads for hard wire or running through conduit. 3/4″ male thread inlet with adapters for 1″ ID tubing. Max 600 …
Cal Pump S580-50 Pump W/50 foot cord Replace with RWS580-50Read More
-
Cal Pump S900T 860 gph Replace with RWS900T-20
$184.99Add to cartCal Pump S900T 860 gph Replace with RWS900T-20, Submersible or inline Pond Fountain pump, 115v, Motors are lubricated by H2O, no seals or or oils, slip on brackets and filter included. For fountains, ponds and in recirculating koi pond applications only. Accepts 3/4″ ID clear tubing on discharge and 1″ ID clear tubing on suction. …
