Flow Control Clamp for 1/2″ID Tubing
$4.99
Flow Control Clamp for 1/2″ID Tubing. For Smaller fountain Pumps with 1/2″ discharge such as pet fountains and indoor tabletop fountains. Easy to adjust with larger dial. L 2″ X W1-3\8″. Copyright [10.25.21] by Wholesalepumps.com
| Weight | 0.2 lbs |
|---|---|
| Dimensions | 8 × 8 × 8 in |
Related products
-
2 inch barbed hose fitting x 1-1/2 inch male threads
$4.99Add to cart2 inch barbed hose fitting x 1-1/2 inch male threads for waterfall pumps only. Barb is a commonly used fitting for waterfall and fountain pumps with 1-1/2″ female threads. Measures 1-1/2″ inch male MPT x 2″ barb. Perfect for submersible applications especially with 2″ ID hose. Note: Barb is not pressure rated, only uses are …
2 inch barbed hose fitting x 1-1/2 inch male threadsRead More
-
1/2″ barbed x 1/2″ male threaded adapter for small to medium water fountain pumps
$4.99Add to cart1/2″ barbed x 1/2″ male threaded male adapter for small to medium water fountain pumps. Adapter is a commonly used fitting among small to medium water fountain pumps with 1/2″ female thread. One end measures 1/2″ inch male MPT, the other measures 1/2 inch barb. Perfect for submersible applications especially with flex tubing. By your …
1/2″ barbed x 1/2″ male threaded adapter for small to medium water fountain pumpsRead More
-
Splitter 1/2″ Y
$3.99Add to cartSplitter 1/2″ Y , Perfect for submersible applications with 1/2″ ID tubing. Applications include using 2 LED rings with separate hose into one hose for pump or Pump with two water outlets on a single fountain. By your Ramm Pump Specialists.. Copyright [10.25.23] by Wholesalepumps.com
-
Ridgid 1/2″mnpt x1/4″Barb Elbow adapter for Ridgid tile saw pump replacement RELL05X025
$6.99Add to cartRidgid 1/2″mnpt x1/4″Barb Elbow adapter for Ridgid tile saw pump replacement RELL05X025 . Matches RIDGID Replacement Submersible Water Pump for RIDGID Tile Saws ; Pump Part Number, AC11306. By your Ramm Pump Specialists.. Copyright [10.25.21] by Wholesalepumps.com
