Impeller cover 12545 md5 pm5 md7 pm7
$16.99
Out of stock
Danner Pondmaster Impeller Cover 12545 for the following units E160713 LISTED 8C99 MD5, PM5 and MD7, PM7 . Cover only , does not include screws.
| Weight | 0.4 lbs |
|---|
Related products
-
PondMaster FOAM BLOCK 12730 Models 9.5 thru 18
$14.99Add to cartPondmaster Filter for E160713 PM9.5 thru 18 and MD9.5 thru 18 Filter DIMENSIONS HEIGHT 4.5″ LENGTH 5.5″ WIDTH 3″ Foam pre-filter block for the following pumps MD and PM Model 9.5, Model 12, Model 18. PM Model 9.5b, Model 12b, Model 18b E160713 LISTED 8C99.
-
MD2 Danner Model 2 Utility Pump 10ft Cord 250 gph
$0.00Read moreE160713 LISTED 8C99 MODEL 2 2512 UTILITY PUMP 115 VOLTS A.C./ 60Hz/ 24 WATTS/ 0.4 AMPS Danner PondMaster Supreme MD2 magnetically driven pump. The smallest of the MD line of pumps. Uses the same ceramic magnet on a ceramic shaft as it’s PM2 counterpart but with a 10 ft power cord making this unit slightly …
-
PondMaster MD1.9 190 gph Danner Model 1.9
$0.00Read moreE160713 2519 Listed 8C99 Model 1.9 Submersible Pump 115 VOLTS A.C./ 60Hz/ 19 WATTS/ 0.3 AMPS MD1.9 PondMaster inline fountain and statuary pump. Can be placed externally below water level. Recommended for statuary’s with a height of 6 ft or less. 190 gph maximum flow (at 0 inches) with a 7ft shutoff (vertical lift). …
-
SP-200
$0.00Read moreDanner PondMaster SP-200. Submersible mag-driven pump. Integrated Unique vertical flow control slider and filter screen. Polished stainless shaft mounted on rubber bearings. Acetal impeller with built in clutch to prevent chattering and enables fast startup. For indoor | outdoor use. 6 ft grounded cord. Great pump for smaller pond and indoor slate fountains with a …
