Since 1998. Shipping out daily.

Cart

    Cart

    Your Cart is Empty

    Back To Shop

    LifeGard Sea Horse .75 hp 4560 gph

    LifeGard Sea Horse .75 hp is identical to the .50 hp but slightly higher lift and flow and is a self priming pump for inline use. Great for waterfalls. Self-priming design. When pump is stopped the waterfall water runs backwards and drains pipe but this problem is solved by installing a swing check valve on suction pipe. If by chance water did drain because of check valve failure the pump holds water in the priming pot to restart avoiding dry-run. Reinforced fiberglass for strength and durability with a large capacity debris trapping basket with see through  lid. Easy access drain plugs for cold weather draining , prevents freezing. All Sea Horse Pumps are threaded 1.5″ FNPT Suction by 1.5″ FNPT discharge. This unit can also be used in smaller swimming pools. Note: must have at least 12 foot of head or lift to operate properly , this can be achieved by installing a special valve, sold here . By your Waterfall pump sales experts. Copyright [10.25.15] by Wholesalepumps.com 

    Pump Model No: DYNII-NI-3/4
    Part No: 340115
    Motor #: S48AA47A03
    HP: 3/4
    115v FR:48Y
    60Hz 1⌀
    3450 RPM S.F. 1.00

    Dimensions : L 24-7/8″ x W 7-3/4″ x H 12-1/8″
    Volts: 115 Vac | Amps : 9.2
    Performance:
    a) 4620 gph @ 15 ft
    b) 4200 gph @ 20 ft
    c) 3120 gph @ 30 ft
    d) 1800 gph @ 40 ft
    Ponds: 20 ft x 20 ft x 1.5 ft deep
    Waterfalls : 20 high x 5 ft wide x 1/2″ thick
    Shutoff 50 ft
    Warranty : Manufacture 1 Year

    Cart

      Cart

      Your Cart is Empty

      Back To Shop