Category: Cal Pumps
Cal Pumps for Pond, Fountain, Waterfall and Marine.
Showing 1–24 of 65 results
-
Cal A210 Thru A430 Replacements (15)
-
Cal Mag Drive (15)
-
Cal Pump E200-E500 Pumps (6)
-
Cal PW and PWM Pumps (5)
-
Cal Stainless Pumps (20)
-
Cal Torpedo Pumps (3)
-
Cal Pump A-320 pump Replace with RA-320S-6 ~ 320 gph
Read moreCal Pump A-320 pump Replace with RA-320S-6 ft cord. Continuous duty service in fresh water, quiet operation. Use it open air or submerged, thermally protected. The motor is permanently sealed in non-toxic biodegradable lubricant. For fountains & ponds. Accepts 1/2″ ID clear tubing on discharge and 3/4″ ID clear tubing on suction. Note: when using pump …
Cal Pump A-320 pump Replace with RA-320S-6 ~ 320 gphRead More
-
Cal A430-20 pump replacement RA430-15 pump 430 gph
$0.00Read moreCal A430-20 pump replacement RA430-15 pump 430 gph. 15 ft cord, 115v, Dual Purpose Permanently lubricated with non toxic mineral oil and thermal overload for protection like original OEM. Includes nylon 1/2″ id hose adapter. By your dual purpose fountain pump experts ~ Ramm water pumps. Copyright [10.25.15] by Wholesalepumps.com. DIMENSIONS:Â CORD 6 FT , PUMP …
-
Cal Pump S1200T-20 Pond Fountain Pump 20ft Cord 860 gph
$0.00Read moreProduct: Cal Pump S1200t-20 517012 Submersible or inline Fountain Pond Pump, 280 w, 120v, 20ft cord. Stainless steel and  Brass permanently lubricated, direct drive motor. The Cal “S” series models run hot and are internally cooled by oil that completely submerges motor so it’s very important to have proper air circulation when used inline. Never install …
Cal Pump S1200T-20 Pond Fountain Pump 20ft Cord 860 gphRead More
-
Cal Pump PWM3900 3300 gph
Read moreCal Pump PWM3900 same great pump design as the PWM2600 magnetic drive pump. Motor sits on a high tech ceramic shaft mated to ceramic bearings. Has been proven to be an effective combination in reducing pump wear. Durable, reliable and energy efficient. Their power and simplicity of operation make them the perfect choice for many water …
-
Cal Pump S580T-50 ft Cord 725 Gph
Read moreS580T-50 517007 Cal Pump is identical to the S580T-6 but with a long 50 ft cord, 2.27a,115v, 184w. Same continuous duty operation that can run submerged or inline. For Fountains and ponds with the same proven construction of bronze and stainless making this pump a legend in the pond water garden industry. Built with a heavy duty …
-
FS-RA filter screen for RA280 pump
$8.99Add to cartFS-RA filter screen for RA280 water pump , Nylon screen. Screen only does not include impeller cover or impeller. Ramm Water Pumps Parts. Copyright [10.25.15] by Wholesalepumps.com.Â
-
Cal SPB1 Bracket for S S580 thru S1200
$13.99Add to cartCal Pump SPB1 517500 Positioning Bracket for Cal Stainlessbrass Dual Purpose Pumps. Fits models s580t and s900t and s1200t’s. MATERIAL, BLACK PLASTIC . By RAMM Water pumps. Copyright [10.25.15] by Wholesalepumps.comÂ
-
CFS155T FNPT Barrel Filter
$14.99Read moreCal Pump CFS155T 517506 Filter Screen  for pump models with 1/2″ or 3/4″ MNPT(male pipe thread). By RAMM Water pumps. Copyright [10.25.15] by Wholesalepumps.com DIMENSIONS: DIA. 3-3/4″, IN 1/2″ AND 3/4″ DUAL THREADED FNPT(female pipe thread), L 4-1/4″
-
IC-RA280-Cover for RA280
$18.99Add to cartIC-RA280-Cover for RA280 water pump , Nylon Impeller cover 3/8″ female inlet 1/4″ mnpt outlet. Cover only does not include filter screen or impeller. Ramm Water Pumps Parts. Copyright [10.25.15] by Wholesalepumps.com.Â
-
Cal Pump P80 Replacement RWP80 80 gph
$18.99Add to cartCal Pump P80 Replacement RWP80 80 gph Submersible Fountain Pump. Built in flo-control at the base of the pump for lower suction ability. Suction cups at base keep the pump sturdy. This pump is excellent for tabletop fountains up to 1.5 feet high. Discharge adapters are setup for 1/2″ or 7/16 ” ID hose. Cal …
-
Cal Pump P80 indoor-2-prong cord RWP80-I 105 gph
$18.99Read moreCal Pump P80 indoor-2-prong cord RWP80-I Submersible Fountain Pump. Built in flo-control at the base of the pump for lower suction ability and thin indoor cord set. Excellent pump for tabletop fountains up to 1.5 feet high. Discharge adapters are setup for 1/2″ or 1/4 ” ID hose. Ramm pump experts. Copyright [10.25.15] by Wholesalepumps.com. DIMENSIONS:  CORD …
-
Cal P60 Replacement RP60
$19.99Add to cartCal P60 Replace with RP60, for indoor fountains. 66 gph mini pump ships with adapters for 1/2″ and 1/4″ id tubing. adjust the flow with front slider. Thin 2 prong cord for easy installation. No lubrication needed only rinse pump grill which snaps in. Bringing you quality replacements by your pump experts Copyright [10.25.15] …
-
Cal P100 Pump Replace with RCP100 ~ 100 gph
$20.99Add to cartCal P100 Pump Replace with RCP100 ~ 100 gph, Submersible Fountain Pump, with flo-control. This pump is excellent for tabletop fountains up to 2.5 feet high. Discharge adapters are setup for 1/2″ or 7/16″(1/4″) ID hose. The best replacements by your pump experts RAMM Water Pumps. Copyright [10.25.15] by Wholesalepumps.com. DIMENSIONS:  CORD 6 FT, HEIGHT …
-
Cal Pump P140 Replace WIth RP140 200 gph
$27.99Add to cartProduct Description, Cal Pump P140 Replace with pump RP140 indoor,outdoor magnetically driven 200 gph Submersible Pump with SS shaft for longevity, only one moving part. This pump is perfect for fountains, statuary’s and small ponds, has a lift of 5 feet but recommended for 4’ft Vert. or less . It can be used for ponds …
-
Cal Filter TS1.5 517102 strainer
$29.99Add to cartCal Filter TS1.5 517102 strainer pre-filter. Filters water before entering pump and helps keep debris out. Pump protection. Easy to clean screen. 1.5″ Threaded Female .  DIMENSIONS : LENGTH 5″ x Dia 3.5″Â
-
CFS170T 1″ FNPT Barrel Filter
$32.99Add to cartCal Pump CFS170T 517100 Filter Screen for pump models with 1″ MNPT(male pipe thread). By RAMM Water pumps. Copyright [10.25.15] by Wholesalepumps.com DIMENSIONS: DIA. 3-3/4″, IN 1″ FNPT(female pipe thread), L 4-1/4″
-
Cal Pump P340 Replace with RP340-20 317 gph
$39.99Add to cartProduct Description, Cal Pump P340 replacement RP340-20 Super efficient mag driven submersible pump with  long 15ft cord. High quality corrosion resistant SS shaft help insure quiet operation and longer life. Innovative cooling chambers. Ships with rubber suction cups and 3/4″ id hose adapter. By your fountain Cal pump sales experts. Copyright [10.25.15] by Wholesalepumps.com. Dimensions …
-
Cal Pump P340 Replace With RP340-12
$43.99Add to cartProduct Description, Cal Pump P340 replacement RP340-12 Efficient magnetic drive submersible pump 115v, 25w, Flow-control, 12Ft cord. Corrosion resistant Ships with suction cups and 1/2″ and 3/4″ id tube adapters. By your fountain Cal pump sales experts RAMM Water Pumps. Copyright [10.25.15] by Wholesalepumps.com. DIMENSIONS: CORD 12 FT PUMPÂ L x W x H 3.5″ X …
-
Cal Pump P300 Replace WIth RWP300 240 gph
$48.99Add to cart// Product Description, Cal Pump P300 Replace With RWP300 240 gph Submersible and inline dual purpose pump, 15 ft cord, 240 gph, 115v. UL Listed pump with a 3 prong cord for outdoor use. Built in flow control dial on pump nose. This pump is perfect for small outdoor ponds and statuary’s  and has a …
-
Cal E200 Replacement RWE200-6 ft Cord 250 gph
$54.99Add to cartCal Popular E200 Pump Replacement RWE200-6 perfect for ponds , statuary’s and small waterfalls and has a lift of up to 6 feet. It can be used for ponds as large as 210 gallons. Not for salt water. By RAMM Water pumps. Copyright [10.25.15] by Wholesalepumps.com Dimensions: Pump only : Cord 6 Ft. Height 4-1/4″ …
-
Cal Pump S225T pump replace with RP225T-F ~ 295 gph
$59.99Add to cartCal Pump S225T-6 pump replace with RP225T-F ~ 295 gph, 115v with a 15ft 3 prong cord for outdoor use. This pump is perfect for replacing S225T eliminating leaking oil and seal problems, built with corrosion resistant polymers. Lift up to 6.5 feet but recommended for 6ft Vert. or less. It can be used for …
Cal Pump S225T pump replace with RP225T-F ~ 295 gphRead More
-
Cal Pump E200 Replacement RWE200-16 ft Cord 250 gph
$61.50Add to cartCal Pump Popular E200 Pump Replacement RWE200-16 perfect for ponds , statuary’s and small waterfalls and has a lift of up to 6 feet. It can be used for ponds as large as 210 gallons. Not for salt water. By RAMM Water pumps. Copyright [10.25.21] by Wholesalepumps.com Dimensions: Pump only : Cord 16 Ft. Height …
Cal Pump E200 Replacement RWE200-16 ft Cord 250 gphRead More
-
Cal Pump A-320 pump Replace with RA320S-6-SUB ~ 320 gph
$66.99Add to cartCal Pump A-320 pump Replace with RA320S-6-SUB ft cord. Continuous duty service in fresh water, quiet operation. FOR SUBMERSIBLE USE ONLY, thermally protected. The motor is permanently sealed in epoxy. For fountains & ponds. Accepts 1/2″ ID clear tubing on discharge. Your Cal Pump People. Copyright [10.25.21] by Wholesalepumps.com Dimensions: Cord 6 ft, L 4.5″ …
Cal Pump A-320 pump Replace with RA320S-6-SUB ~ 320 gphRead More
-
Cal E350 Replacement RWE350-6 ft Cord 350 gph
$69.99Add to cartCal Popular E350 Pump Replacement RWE350-6 perfect for ponds , statuary’s and small waterfalls and has a lift of up to 10 feet. It can be used for ponds as large as 350 gallons.  By RAMM Water pumps. Copyright [10.25.15] by Wholesalepumps.com Dimensions: Cord 6 ft. Height 4-7/8″ Length 4″ Width 2-3/4″ Electrical : Amps …
